rate of reaction
英 [reɪt ɒv riˈækʃn]
美 [reɪt əv riˈækʃn]
网络 反应速率; 化学反应速率; 反應速率; 反应的速率; 反应速度
双语例句
- And so we plug this into the, we write our rate of reaction.
那么我们把这代入，我们写我们的反应速率。 - This is due to the fact that physical factors ( often difficult to evaluate) control the rate of reaction.
这是因为物理因素（往往难于估价）控制反应速度的事实所引起的。 - ( especially of fissionable material) able to sustain a chain reaction in such a manner that the rate of reaction increases.
（特别是指裂变物质）能够以反应速度不断增加的方式继续连锁反应。 - At the second, the rate of reaction becomes slow and the process of reaction accords with one order reaction kinetics equation. Application of ANSYS in the Transient Dynamic Analysis of Waste Dump
后期阶段反应速度较慢，并符合一级反应动力学方程。ANSYS在排土场动力时程分析中的应用 - We have something that looks like k1 k2 over k minus one times A is the rate of reaction.
然后我们有看起来是M不再存在，我们有看起来是2，除以k负1乘以，A是反应速率，一级。 - The polymerization follows the mechanism of butadiene-styrene emulsion polymerization, and the rate of reaction has nothing to do with the reaction time.
聚合基本规律遵守丁苯乳液聚合规律，聚合反应速率与反应时间无关。 - To increase the rate of reaction, a catalyst is used.
为了提高反应速度，可使用催化剂。 - The rate of reaction between novalac epoxy resin and acrylic acid obeyed first order.
实验表明，环氧树脂与丙烯酸的反应为一级动力学反应。 - The effects of the structure of ligands and substrates, the type of alkali, and reaction time on rate of reaction and stereoselectivity were discussed.
讨论了配位基的形状，反应物的构造，碱的类型以及反应时间对反应速率和立体选择性的影响。 - The rate of reaction.
这个反应速率。 - The type of granulation of the ammonium nitrate used is significant in controlling the rate of reaction, and especially the induction time.
所用硝酸铵的颗粒类型，对于控制反应速度，特别是诱导期，是很重要的。 - And any of those can be used to define the rate of reaction.
任何一个数都可以用，来定义反应的速率。 - Catalysis has increased the rate of reaction.
催化作用提高了反应的速度。 - When the mole fraction of excess titanium is 16%, the adiabatic temperature of the system is as high as 3193K, the rate of reaction is most quick, and the compaction of product is higher.
当Ti过量16%（摩尔分数）时，体系的绝热温度仍高达3193K，反应速度最快，产物的致密度也较高。 - Change of the characteristic peak ( 906 cm~ (-1)) of epoxy group during the process of curing reaction is measured by FT-IR spectrometer. The rate of reaction obtained by FT-IR is consistent with that by DSC.
用FT-IR跟踪固化反应过程中环氧基团特征吸收峰（906cm~（-1））的变化，求得的固化反应速率与DSC法测定的结果较吻合。 - The rate of reaction increases with increasing temperature.
反应速率随等温温度的提高而加快。 - The rate of reaction decreased when more Si-Cl bonds were present in the silane to be chlorinated.
反应进行速度随着被氯化的矽烷中所合之矽氯键增多而减慢。 - The experimental results showed that the excessively high temperature on rate of reaction were unfavorable to the reaction, the increase of isobutene gas pressure, stir speed and initial concentration of tertiary butyl alcohol increased reaction rate, and the decease of particle size increased reaction rate.
结果表明，过高的温度对反应产生不利影晌；增加异丁烯气体压力、提高搅拌速度及叔丁醇初始浓度能提高反应速率； - The rate of reaction ( R_p) and average degree of polymerization((?)
聚合速度（Rp）和平均聚合度（（？） - In all the systems studied, the rate of reaction showed a first-order dependence on the cyanate concentration in the kinetically controlled stage.
在所有的体系中，催化反应速率常数对氰酸酯单体浓度在动力学控制阶段表现为一级反应。 - The rate of reaction is related to temperature and hydrogen-ion concentration and so on.
腐蚀反应速度与温度、H~+浓度等有关。 - By contrast, the dynamic state of chemical composition is unbalanced. Its transition process has been found to be dependent on bed material quantity in the bed, production rate of reaction products and the variation range of related parameters, etc.
而化学成份的动态是不平衡的，它的过渡过程与床内的床料量、反应产物的产率以及相关参数的变化幅度等有关。 - Based on thermodynamic analysis for ammonia complexion system, the main parameters that influence the rate of reaction in the process of nickel chemical plating on a surface coated h BN were studied.
在分析氨络合体系六方BN表面化学镀镍的热力学基础上，分别研究了影响镀覆反应速率的主要因素及其变化规律。 - Designing a cyclization reaction of caffeine to improve effect of axial mixture, recovery of materials, rate of reaction and quality of intermediate.
设计制作咖啡因车间闭环反应罐，增强轴向混合效果，从而增加物料回收，改善反应效果，提高反应收率和中间体质量。 - The parameter β> 0 is a lumped parameter representing the effects of diffusion and heat conduction, K is the rate of reaction and q_0 represents the amount of unit energy liberated by chemical reaction.
z表示未燃气体所占的质量百分比，β＞0是混合变量，表示扩散和热传导效应。K是反应速度，q0是化学反应释放的单位能量。 - The microphotos of specimen also show obviously that the coverage rate of reaction film relates to the slip/ roll ratio, i.e. the coverage rate of surficial film decreases with increasing slip/ roll ratio.
从试件表面的显微照片上可以明显地看出，反应膜的覆盖率与滑滚比有关，随滑滚比增加，表面反应膜的覆盖率减少。 - In the substitution reaction of nucleophilic, whatever we use S_N1 or S_N2 reaction course, the rate of reaction is the most rapid.
在亲核取代反应中；无论按SN1历程还是SN2历程，烯丙式卤代烃的反应速度都是最快的。 - Bis ( diphenyl methyl) ether was synthesized under microwave irradiation by dry reaction at ambient pressure. The rate of reaction was dramatically accelerated and high yield was obtained, comparing with that of methods using organic solvent as medium or using dry reaction by conventional heating.
在常压下用微波辐射固相反应的方法合成了二苯基甲基醚，与用有机溶剂为介质及传统的热固相反应方法相比，其反应速率快，产率高。 - The average rate of reaction becomes slowly with dosage of diluent down.
平均固化速率大体上随稀释剂用量的减少而变慢。